TPU-3000 Reinforced epoxy primary coating

TPU-3000 Reinforced epoxy primary coating

TPU-3000 is the combination of imported 828 or 128 resins, high quality solvent, BYK additives, American Gas company curing agents and other raw materials. It has high solid content and low viscosity features, and has two components of epoxy material, which is produced by advanced technical craft. TPU - 3000 has a series of excellent characteristics: good mechanical abrasion resistance and adhesion ability.

product description

 Product Performance   

It has good penetration and high sealing ability for concrete base surface, also can improve the U-Boat Classico Replica hardness of base surface and provide excellent adhesion and has good coating-forming ability.

Product Function 

As a common used base coating of TPU series of epoxy resin floor coating, it’s used on concrete and other bases.

Technical Index 


component A

component B

hours of  use




curing time

surface dry




hard dry








colorless and transparent

reddish brown or yellowish



component A: component B =5:1

solid content

More than 70%after mixing


Construction Specification

Mixture Put component A and B into the mixing barrel in certain proportion and stir well evenly

Construction method: Applying by roll coating, scrape coating, spray coating or brush coating

Reference Dosage: 0.15-0.3kg/

Construction Condition: Moisture content (MC) must be less than 8% and relative humidity (RH) less than 55%, the construction should be stopped when it’s comes to rainy day or atmospheric relative humidity is higher than 85%, or the temperature is below 10 degree centigrade

Sealed storageStore at cool and ventilate, moisture-proof, and sun-preventing place


As chemical Product, it is harmful or fatal to swallow.  Please go to doctor immediately if swallowed. If it splashes into eyes, please rinse with plenty of water right away and for those with serious condition, please go to doctor immediately. Pay attention to take precautions like fire-proof and explosion-proof. The disposal of the residue shall comply with the safety rules of the state or local government.


Important Note 

Topu Company guarantees the quality of products. The suggestions and information provided above are derived from our independent laboratory. They are accurate in controlled conditions.  However, because we can’t control the construction environment directly and continuously when you use the product, we refuse to undertake all kinds of direct or indirect responsibilities even if you follow the suggestions, recommends, schemes, and data we provided. Maximum compensation from seller and buyer's maximum claim for liability is the price of order.



component A20KG      component B4KG